Industry News

How SPI Machines Can Improve the Quality of PCBA Solder Paste Printing

Are you struggling with issues related to the quality of your solder paste printing? Do you want to improve the accuracy of your PCBA assembly processes to increase productivity? If the answer is yes, then you may want to consider adding SPI machines to your manufacturing arsenal.

Modular design becomes more popular in electronic design

Modern electronic product design have become far more complex than in the past. In addition to the rise of the Internet of Things (IoT) and the Industrial Internet of Things (IIoT), consumer expectations for the utility, functionality and compatibility of modern electronics are higher than ever. As ......

How to perform automatic insert of THT components on PCB?

Different from the surface mount (SMT) process, the automatic plug-in (THT) process assembles components by inserting component pins into pre-designed holes on the PCB and then soldering. The following is the basic process of PCB automatic plug-in:

Trends for PCB surface mount technology development

Surface mount technology (SMT) is currently one of the most widely used assembly technologies in PCB (Printed Circuit Board Assembly) production. In recent years, SMT technology has been rapidly developed and applied, continuously promoting the development of the entire PCB industry. Here are some S......

How to remove the flux on PCBA?

During the PCBA production and manufacturing process, some harmless contaminants and by-products may remain on the PCB due to the collaboration of different materials, components, and processes. These residues may affect the operation of the circuit and the quality of the end product, so cleaning is......

Drived by critical application, wide bang-gap semiconductor application booms

When the semiconductor industry is gradually entering the Post-Moore-era, wide band-gap semiconductors are on the historical stage, which is considered an important area of "exchanging overtaking". It is expected that in 2024, the wide band-gap semiconductor materials represented by SiC and GaN will......

What is PCBA?

PCBA (Printed Circuit Board Assembly) refers to the process of integrating and manufacturing a PCB (Printed Circuit Board) that has completed component installation, testing, soldering, and other processes with other finished components into a product. Simply put, PCBA is an important process in whi......

How can trace routing improve PCB design?

When designing PCB (printing circuit board), the electronic engineer must follow the best practice of the wiring wiring. This helps maintain PCB signal integrity and reduce electromagnetic interference (EMI).

<...34 35 36 37 38 >